Construction and finish

Components installed in a heavy duty sheet steel enclosure

Phosphate chemical pre-coating of steel provides corrosion resistant surface

Polyester composite powder top-coat forms high gloss and extremely durable finish

Lockable hinged panel door provides for easy component access

Mounting

Mounted to generating set baseframe on robust steel stand

Vibration isolated from generating set

Located at rear of generating set with excellent panel visibility

Installed as an integral part of the enclosure on-enclosed generating sets

Instrumentation

AC instruments are 90° deflection, 72 mm square, flush mounting

AC instruments in accordance with IEC60051 and 60529, DIN43700 and 43718, BSEN60051 and 61010, UL94

Engine gauges are heavy duty, 52 mm diameter, electrically operated

Controls

Protected by fused DC supply from starting battery

Printed circuit board assemblies with field proven circuit elements

Thoroughly tested during manufacture and final test of generating set

Multi-pin plug and socket connections for ease in servicing

Switches and pushbuttons are heavy duty industrial type

Internal AC and DC panel wiring harnesses pre-

formed for uniform routing and enhanced interconnect reliability

Instrumentation

Voltmeter

Ammeter

Combined frequency & tachometer

Hours run counter

Coolant temperature gauge

Lube oil pressure gauge

Battery condition voltmeter

7 position voltmeter phase selector switch

4 position ammeter phase selector switch

Controls

Run/off/auto switch

Emergency stop button (red)

Engine preheat pushbutton

Lamp test pushbutton

Cycle cranking (3 cycles with adjustable timing)

Shutdowns with individual warning lamps

Fail to start

High coolant temperature

Low lube oil pressure

Overspeed

Remote signals/contacts from panel

Terminals for remote emergency stop

Common fault alarm signal

Additional fault channels

One additional fault channel is available, individually

programmable for shutdown or alarm