Construction and finish
Components installed in a heavy duty sheet steel enclosure
Phosphate chemical pre-coating of steel provides corrosion resistant surface
Polyester composite powder topcoat forms high gloss and extremely durable finish
Lockable hinged panel door provides for easy component access
Mounting
Mounted to generating set baseframe on robust steel stand
Vibration isolated from generating set Located at rear of generating set with excellent panelvisibility
Installed as an integral part of the enclosure on enclosed generating sets
Instrumentation
AC instruments are 90° deflection, 72 mm square, flush mounting
AC instruments in accordance with IEC60051 and 60529, DIN43700 and 43718, BSEN60051 and 61010, UL94
Engine gauges are heavy duty, 52 mm diameter, electrically operated
Controls
Protected by fused DC supply from starting battery
Printed circuit board assemblies with field proven circuit elements
Thoroughly tested during manufacture and final test of generating set
Multi-pin plug and socket connections for ease in servicing
Switches and push buttons are heavy duty industrial type
Internal AC and DC panel wiring harnesses pre-formed for
uniform routing and enhanced interconnect reliability.
Instrumentation
Voltmeter
Ammeter
Combined frequency & tachometer
Hours run counter
Coolant temperature gauge
Lube oil pressure gauge
Battery condition voltmeter
7 position voltmeter phase selector switch
4 position ammeter phase selector switch
Controls
Run/off/auto switch
Emergency stop button (red)
Engine preheat push button
Lamp test push button
Cycle cranking (3 cycles with adjustable timing)
Cool down timer
Shutdowns with individual warning lamps
Fail to start
High coolant temperature
Low lube oil pressure
Over speed
Alarms with individual warning lamps
Low battery voltage
Remote signals/ contacts from panel
Terminals for remote emergency stop
Common fault alarm signal
Additional fault channels
One channel available for optional shutdowns
One channel available for optional alarms