HAT150

Giá:

Hãng sản xuất: SMARTGEN

Thông tin chung: HAT150 ATS controller is an automatic control module using microprocessor as core. It can accurately detect 2-way 3-phase/single phase voltage and judge voltage abnormal (such as, loss of power, over voltage, under voltage and lack of phase), then control ATS after delay. After abnormal delay of #I power, the controller will send signal to start the genset.


HAT150 ATS controller is an automatic control module using microprocessor as core. It can accurately detect 2-way 3-phase/single phase voltage and judge voltage abnormal (such as, loss of power, over voltage, under voltage and lack of phase), then control ATS after delay. After abnormal delay of #I power, the controller will send signal to start the genset.
PERFORMANCE AND CHARACTERISTICS
HAT150 controller can detect 2-way 3-phase/single phase voltage (2-way mains and 2-way gens or 1-way mains and 1-way gens) and control ATS.
  1. Can achieve PC programming control, voltage abnormal delay, genset stop delay, voltage calibration and so on which all operated on graphic interface. During computer programming, the base plate of the controller must be opened, and then use SG72 interface module (USB to LINK) to program via testing software of PC;
  2. Normal delay of #I power or #II power can be set. Start delay of genset can be set;
  3. Abnormal delay of #I power or #II power can be set. Stop delay of genset can be set;
  4. “#I Priority”, “Manual”, “Mutual Backup”, “#II Priority” can be set through panel knobs. Ensure “#I Power Priority”, “#II Power Priority” or “No Priority” and maintenance;
  5. Isolated design of 2-way Neutral;
  6. Closing time of switch is 5 seconds. If detecting closing signal during this period, disconnect at once;
  7. With re-closing function. This can make open/close breaker enabled even when the positions of operating mechanism and switch are inconsistent.
  8. When 2-way power and volts are abnormal at the same time, if voltage of A phase is normal, ATS will automatically transfer to Breaking (Middle) Position;
  9. With fire reset interface. When the input port is enabled, ATS will automatically transfer to Breaking (OFF) Position;
  10. LED can display working modes of the switch clearly;
  11. Strong anti-electromagnetic interference ability, can be used under complex electromagnetic interference environment;
  12. Modular configuration design, flame-resisting ABS plastic shell, inserted type terminals connection with compact structure and easy installation.