DSE705

Giá:

Hãng sản xuất: DEEPSEA

Thông tin chung: Auto Transfer Switch Control Module
The DSE705 is an Automatic Transfer Switch Control Module for use with generator applications. The module monitors an incoming mains (utility) supply and issues a start command to the generator control system when the power fails. 
 


SPECIFICATION

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
MAXIMUM OPERATING CURRENT
50mA
MAXIMUM STANDBY CURRENT
50mA
ALTERNATOR INPUT RANGE
75V(L-N) to 333V AC (L-N) absolute maximum
ALTERNATOR INPUT FREQUENCY
50Hz – 60Hz at rated engine speed (Minimum: 75V AC L-N)

OUTPUTS

START & RUN OUTPUTS
1.2 Amp DC at supply voltage. Switches to battery negative when active
CLOSE GEN/MAINS (UTILITY) CONTROL OUTPUTS
1.2 Amp DC at supply voltage. Switches to battery negative when active
AUXILIARY OUTPUTS
1.2 Amp DC at supply voltage. Switches to battery negative when active