DSE704

Giá:

Hãng sản xuất: DEEPSEA

Thông tin chung: Auto Mains (Utility) Failure Control Module
The DSE704 is an Auto Mains (Utility) Failure Control Module designed to provide a wide number of engine monitoring and protection features. The module monitors engine temperature, low oil pressure, fail to start, charge fail and over and under speed. 


SPECIFICATION

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries

CHARGE FAIL 
8 V charge fail at 12 V, 16 volt charge fail at 24 V

TYPICAL OPERATING CURRENT
12 mA at 12/24 V

MAXIMUM OPERATING CURRENT
50 mA at 12/24 V

INPUTS

ALTERNATOR INPUT RANGE
75 V (L-N) to 333 V AC (L-N)  absolute maximum

ALTERNATOR INPUT FREQUENCY
50Hz-60Hz at rated engine speed (Minimum 75V AC L-N) (Crank disconnect from 15V L-N @ 20Hz. Overspeed +14% (+24% Overshoot) Underspeed -20%)

OUTPUTS

START & FUEL OUTPUTS
1.2 Amp DC at supply voltage. Switches to battery negative when active. 

AUXILIARY OUTPUTS 
1.2 Amp DC at supply voltage. Switches to battery negative when active.