GU320A is a kind of intelligent controller of generator which adopt high grade CMOS chip. It can configure the control procedure and protection parameters of the generator, including lots of function such as measuring, controlling, protection, three remote and so on, which completely satisfied the automatic controlling requirement of different generator sets for the generator user or factory.
The controller measure and display all parameters the generator output, and the rotating speed, oil pressure, temperature, DC source voltage, running time of the engine and so on. All of the voltage measured in real virtual value to ensure the accuracy of the data.
Including big LCD display and menu selection for Chinese and English.
The keys on the control panel are used to select the control mode, start the running procedure, display data, and modify the running protection parameters. The LED indicates the operating mode of the controller and the running state of the generator sets. LCD display each measured parameter and state.
The controller is integrated closely by aluminum alloy panel and steel shell which has been spurt powder. All connection of the controller are connected by pin-like terminal with lock, such device can be connected、moved 、maintained and replaced easily and conveniently.
GU320B Genset intelligent controller is adopted high performance computer chip, can modify the control procedure and protection parameters of generator, which incorporated kinds of functions, such as measure, control, protection, three remote, and programmable management. It fully meets the auto control requirements of different kinds of Genset for generator user and or special assembly factory.
The controller measure and display all output electric parameters for generator, and rpm, oil pressure, coolant temperature, DC source voltage and running hours for engine, and the voltage and current adopted true RMS measure to make sure data accuracy.
Optional Chinese and English menu, large LCD display.
Optional kinds of preset PT-sensor, and can custom parameters by corresponding software.
Buttons on control panel are used for selecting control modes, starting the running procedure, displaying data, and modifying the parameters of running and protection. LED indicators are used for indicating the operation mode of controller and the running status of Genset, and LCD displays each measuring parameter and status.
Optional communication interface of RS485 or RS232, realizing long distance monitor, or communication with PC, fully realizing functions of remote signaling, telemetering and remote control, can read and set the running parameters of controller.
The controller is closely combined by panel and powder coated steel enclosure, and the panel is die-casting by flame-retarded and high strength plastic. All connections of controller are connected by pin-like and locked up terminal, easier and more convenient to connect, move, maintain and replace the device.