MINCO S11 Gasonline gensets automatically control module

S11 mainly use to wind coolant gasoline genset or mini water coolant diesel genset, it has spot LED display、spot setting and automatically run function, which can autoprotect when genset is failure and auto strip and stop when genset is over load. Instead of old gauge and breaker etc. all kindsof accessories, S11 use LED panel withbeautiful display and strong function, simply operation, so as to be perfect update product for mini genset automatization and intelligentize.

Provide freely the control software based on Windows system, which can correctly set the run mode, alarm mode and delay parameter of genset，and user can star, stop and auto run the genset through computer remote control or telecontroller.

S11 has highly developed on performance based on S10，and provide OEM service according to the requirement of client.

I. Function Introduction:

1. Digit display function: voltage, current, running time, frequency, battery voltage, fault code.
2. State display function：fault state, remote start state, load supply stat.
3. Fault monitor function：over load, speed signal lost, start failure, low oil pressure, high water temperature, over speedover frequency, over voltage, emergency stop、low battery voltage.
4. RS485/232 communication terminal, remote communication function.
5. One machine run alone or remote control, remote connection is for option.

II. Aspect Character：

1. Product specification：single voltage, dual voltage（220/110 V）.
2. Control mode：one machine, communication line, telecontroller.
3. Install mode：meter box fixed with copper pillar, separately module.
4. Apply to generator：gasoline genset, mini diesel genset （standard configuration apply to 15KW below genset, more bigger genset can be ordered）.
5. Power supply：DC8－36V, spare current less than 300 mA .
6. Working environment：-20~70℃, Relative humidity <99%.