Generating set parameter displays (2 X 4 line LCD display)

 AC voltage phase to phase and phase to neutral

(on 3 phases)

AC current (on each of 3 phases)

Frequency

CosF (power factor) average

kW - total + per phase

kVAr - total + per phase

kWh - total

% Voltage difference between bus and generator

Phase shift

Frequency slip

Hours run

Coolant temperatur

Lube oil pressure

DC voltage

Bus parameter displays

 AC voltage (on a single phase)

AC voltage/frequency within limits indicator

Operator controls

 Off/auto/test/run control switch

Emergency stop pushbutton (lockdown)

Membrane keypad with tactile feedback

AC voltage adjust - manual and automatic

Engine speed adjust - manual and automatic

System controls

 3 attempt start counter

Cool down delay

Pre-glow delay

Remote start capability

Reverse power relay

Manual synchronizing

Automatic synchronizing

Automatic load sharing control

Automatic loading and unloading ramp controller

Load sequencing control

Static battery charger (5amp) 220/240 Volt AC

Quadrature droop kit

Shutdowns and alarms

 High lube oil temperature shutdown

Low coolant temperature shutdown

High coolant temperature shutdown

Low oil pressure shutdown

Overspeed shutdown

Fail to start shutdown

Emergency stop operated

Reverse power shutdown

Overvoltage shutdown

Undervoltage shutdown or alarm

Overfrequency shutdown

Underfrequency shutdown or alarm

Fail to synchronise alarm

Battery undervoltage alarm

Battery overvoltage alarm

Alternator loss of excitation alarm

Spare fault channels, up to 3:

– Low coolant temperature alarm

– Earth fault

– Low fuel level shutdown or alarm

– Low coolant level shutdown

Status indicators

 General switch status indicator

Fault log memory

Password security

Interface to remote monitoring package