Minco 400 genset controller adopts special module of F2 series with high performance microprocessor and industry components.Wide–screen LCD display, mutually operated with Chinese and english double language menu.All the input and output ports support user-defined function,actually meets different types of genset and other auto control requirements.Minco400 has special timing start function,which adapt to start genset at regular time of each month,each week or each day.Perfect auto start ,auto protection and ATS control function,optional with RS232 communication port.

Minco 400 is a type of high cost performance and multipurpose intelligent controller.

I. Function and Charateristics

1. Display with single phase of voltage,current and frequency.Real virtual value measuring for voltage and current,powerful function ，action smartly；
2. Small and exquisite shape,wide-screen LCD display with 128×64 lattice and  black-light；
3. Chinese and English double language menu,mutual operation, can be set and operated without the computer；
4. Auto start, auto protection, ATS control function；
5. Perfect auto protection,warning details and working statement character display directly,fault record more than 50 items；
6. Connected parameters of coolant temp.,oil pressure, fuel level    etc,is abundant；
7. All relay contact capability of strat and fuel is above 10A/250VAC/30VDC，the other is 5A；
8. User-defined to the input and output port,timing start or stop function；
9. RS232 communication，attached “four remote control”monitor software.

II. Control parameter list:

1. Analog inputs (9 items) One phase voltage、load one phase current、frequency、power、coolant temp.、oil pressure、fuel level、battery voltage、charge voltage etc.；
2. Switch inputs (6 items)  Remote start、emergency stop、user-defined input1-4（Optional：monitor，low oil pressure；high coolant temperature；acceleration limit；deceleration limit；high oil temerature；low fuel level（alarm non-stop）；high fuel level；fload charge fail alarm；alarm；alarm non-stop（running state）；alarm stop etc.12 items）etc；
3. Rely output (7 items) Fuel、start、excitation、user-defined1-4（public failure；auxiliary stop；genset supply；automation；idle closed；idle disconnect；pre-fuel；warm up；acceleration；deceleration；damper；overcurrent；high speed；low battery；pumping；alarm etc.16 items）
4. Delay setting (22 items) Delay of cool down；delay of pre-fuel；delay of genset start；delay of idle start；delay of crank interval；delay of idle stop；crank time；acceleration delay；bypass time；delay of auxiliary input 1；delay of energize to stop(ETS)；delay of auxiliary input 2；   delay of auxiliary input 3；overload delay；delay of auxiliary input 4；over voltage delay；delay of charge failure；delay of over frequency；delay of low battery；delay of warm up；delay of transform；deceleration delay；
5. System parameter setting (17 items) Trip frequency；output 3 setting；start method；current ratio；output 4 setting；display mode；password setting；input 1 setting；language choose；address；input 2 setting；back light choose；measurement 1 setting；input 3 setting;output 1 setting；input 4 setting；output 2 setting.

III. External Features

1. Size of outside：
• front panel (L×WxD) 96x96x9mm
• Back shell (LxWxD) 84x84x50 mm
• Hole size of installation (L×W) 85x85mm
2. Power supply：DC8-40 V，<300 mA ；
3. Work environment：-25~75℃，relative humidity：<95%